...

Does my ionizer have mineral deposits?

Health
July 8, 2021

If you have a hard water source, mineral deposits will appear over time in the tubes and flexible hose of your ionizer. Below we have prepared a series of images that show you the main components you need to check to assess the condition of your ionizer.

Where to check for deposits on an ionizer mounted above the countertop

Stainless flexible hose

You can quickly check if your ionizer has salt deposits by looking at the screwed end in the device of the flexible stainless hose through which the alkaline water comes out.

Unscrew the hose and look at its end from the appliance. If you see a thinner or thicker white ring on the inside, your ionizer has mineral deposits. Below are some pictures: one with a stainless steel hose without deposits, and some examples of stainless hoses with deposits. As you can see, the deposits can be in a very thin layer, or they can even clog the hose.

Flexible stainless hose, the end of which is screwed into the appliance. No mineral deposits.
Flexible stainless hose, the end of which is screwed into the appliance. With mineral deposits โ€“ 3 examples.

Upper nozzle

Most of the time, it is enough to check the flexible stainless hose to see if the ionizer needs to be cleaned. Optionally, you can also check the upper nozzle, the part in which it is screwed.

You have two examples below: an upper nozzle with no deposits inside, and one with mineral deposits inside. Do you see how much the diameter through which the alkaline water flows has decreased in the second case?

You do not need to remove the upper nozzle to examine it, just unscrew the flexible stainless hose from it and you can see inside the nozzle.

Upper nozzle after removing the flexible stainless hose. No mineral deposits.
Upper nozzle after removing the flexible stainless hose. With mineral deposits.

Where to check for deposits on an ionizer mounted under the countertop

Upper nozzle

Upper nozzle used for ionizers mounted under the sink, after removing the hose adapter. No mineral deposits.
Upper nozzle used for ionizers mounted under the sink, after removing the hose adapter. With mineral deposits.

Alkaline water hose adapter

Alkaline water hose adapter normally mounted in the upper nozzle.
Alkaline water hose adapter normally mounted in the upper nozzle. With mineral deposits.

Alkaline water coming out of the ionizer

Mineral deposits will appear in the hole marked with the red arrow and will look the same as in the previous pictures.

Alkaline water outlet with 5/16 โ€hose.
Alkaline water outlet with 5/16 โ€hose disconnected.
Alkaline water outlet connection plug.
Alkaline water outlet connection plug with 5/16 โ€hose disconnected.

Mineral deposits will appear inside the tube and will look like in the previous pictures.

If you have hard water, we recommend using one or more of the following solutions:

Use of cartridges to prevent mineral deposits.

  • Ionizer cleaning for a maximum of 12 months. Find out how to clean your ionizer yourself in the article How to clean your water ionizer.
  • If the hardness of your water exceeds 15 degrees German (ยฐ D), contact us at [email protected] and together we will find the best solution for you.

Join 2,000+ subscribers

Stay in the loop with everything you need to know
[wpforms id="3845"]

Other stories